The incredibly efficient Eccotemp FVI12-NG Tankless Water Heater uses an intense gas-fired flame to instantly heat water the moment it passes through the heater exchanger. So, as long as you feed water in, hot water will come out! With the included horizontal vent kit, this Eccotemp FVI12-NG Tankless Water Heater is ready to install for indoor use right out of the box. Great for cabins and smaller homes, so you don't bust your budget for a hot shower! The Eccotemp FVI12-NG Tankless Water Heater is a manual water heater. This means that any water temperature adjustments must be made at the face of the unit using the knobs for water flow and gas pressure. Mixing cold water at your output source is not recommended.

• Whole home indoor, gas-powered tankless water heater, that activates only when in use, making it an energy saver.
• For indoor installation with safe, efficient power ventilation and perfect for any small home, cabin or apartment.
• Easy to read digital temperature display, on a compact and space-saving design with minimal noise output.
• Safe electronic ignition system; plugs into standard 120-volt electrical outlet with UL-listed cord.
• Uses standard 1/2" NPT water fittings and is equipped with easy to use manual water temperature controls.

Product Features:

• Frustration Free Packaging
• Digital thermostat and temperature display
• Manual water-temperature controls
• Stainless steel horizontal vent kit included
• Uses gas only when hot water is activated
• 30-80 psi water pressure
• 25,000-74,500 BTU
• For indoor installation with safe, efficient power ventilation
• Precise temperature and water-flow adjustment
• It pulls only 2 watts and 1.07 amps during operation
• 77 Degrees F rise at 2.3 GPM (gallons per minute)
• 4.0 GPM flow capacity

What's Included:

• Natural Gas Tankless Water Heater
• 2 1/2" 90 degree Elbow with Backflow Preventer
• Wall Thimble
• 2 1/2" x 20" Termination Pipe
• 110 volt UL listed power cord
• Hardware Pack
• Instruction Manual
• 2-Year Limited Warranty

FVI12 Product Info and Manual
FVI12 Warranty

The Eccotemp FVI12 has been tested for use at elevations up to 2000 feet. Installation and use of the Eccotemp FVI12 above 2000 feet may affect overall product efficiency and performance.

IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEM, RECIRCULATING, or FLOOR HEATING nor be used with a bilge pump.

Please Note: Failure to clean and descale your water heater quarterly can result in lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater! Click here for details.

All Whole Home Water Heater purchases will be shipped with SIGNATURE REQUIRED. If you wish to remove SIGNATURE REQUIRED from your shipment please contact Customer Service immediately to have it removed. Please Note: By opting out of SIGNATURE REQUIRED you release Eccotemp Systems, LLC from all liability of lost or stolen packages. Call 1-866-356-1992 or chat with us here to speak with a customer service agent.

 

EccoTemp hereby warrants this product to be free of material defects in materials and workmanship when installed and operated according to EccoTemp’s installation and operating instructions. This Limited Warranty extends to the original purchaser and subsequent owners, but only while the product remains as the site of the original installation. This Limited Warranty terminates if moved or reinstalled at a new location. There are no warranties, express or implied made or given other than contained in this Limited Warranty. No agent, employee or representative of EccoTemp has any authority to bind EccoTemp to any representation or warranty concerning the Product not contained in this Limited Warranty. Except as expressly set forth herein, THERE ARE NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO ANY GOODS SOLD HEREUNDER. BUYER’S EXCLUSIVE REMEDY IS LIMITED TO REPAIR OR REPLACEMENT OF THE GOODS SOLD, AT ECCOTEMP’S DISCRETION. ECCOTEMP SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Item Period of Coverage Heat Exchanger 2 years All other parts 2 years Coverages are void if the unit is used in a hot water circulation loop, in series with a circulation system or where an on-demand recirculation system is not incorporated. Owner is responsible for all other costs incidental to repair such as labor, shipping, delivery and permits. Proof of purchase required. Products repaired will be covered under this Limited Warranty for the remainder of term of the original purchase. This Limited Warranty becomes null and void if any of the following are determined to be a contributing factor to the failure of the product: 1. Abuse, misuse, alteration, neglect or misapplication; 2. Improper or inadequate maintenance; 3. Inadequate water quality; 4. Installation in a corrosive or otherwise destructive environment; 5. Freeze Damage; 6. Scale buildup; 7. Incorrect gas or water pressure; 8. Acts of force Majeure This Product is not to be used as a pool or spa heater. Shipping Related Costs: Within the first 30 days of purchase, Eccotemp will cover all ground shipping costs for warranty related issues, excluding AK, HI, Canada, and any location outside of the continental US. After the first 30 days of purchase, Eccotemp will cover all shipping costs to the customer for warranty related issues, excluding AK, HI, Canada, and any location outside of the continental US. After the first 30 days of purchase, the customer is responsible for all shipping to Eccotemp, regardless of reason or circumstance. The method for warranty related shipping will be Ground equivalent with the provider of Eccotemp’s choosing. AK, HI, Canada, and any location outside of the continental US, will be responsible for all shipping costs, regardless of reason or circumstance. All shipments of any type of product coming to Eccotemp for any reason must have an RGA for any repairs to be made. Please contact Eccotemp to obtain an RGA number prior to shipping anything to Eccotemp. Failure to do so could result in loss of product. Eccotemp will not be responsible for replacement due to loss or damage if these steps are not properly followed. Extended Warranty : Warranty Features: * No hassle complete replacement of your item it breaks * Coverage begins after the manufacturer warranty expires. * Does not include accidents. Standard Features: * No hidden fees or repair costs * If a product can't be repaired it will be replaced * Power surge protection * Free replacement of the product should it require 3 repairs in 1 year. (after the manufacturer warranty expires) Extended warranty is offered through a third-party company we have partnered up, Warranty Life. For more information please visit www.warrantylife.com. Within 24 hours of purchase of extended warranty you will receive a email with all of your extended warranty information. All claims are to be filed directly through warranty life. *EXTENDED WARRANTIES APPLY TO ORDERS WITHIN THE U.S ONLY AT THIS TIME*